Gordon Bo-Tuff E Glass ULS

A continuous unidirectional "E" fiberglass combined with a 50/50 woven fiberglass inlay (scrim) that has high strength and stiffness along the longitudinal (0) axis and provides cross strength (90 degrees to the longitudinal axis). Available in .040 & .050, Clear, Black & Brown. Sanded 1 side.


Gordon Bo-Tuff E Glass UL

A continuous unidirectional "E" fiberglass/epoxy laminate that has high strength and stiffness along the longitudinal (0) axis. Available in .030, .040, .050, & .055 (1 1/2" only) Clear. Sanded 1 side.


Core-Tuff Glass

Unidirectional Laminate manufactured by Gordon Composites, Inc. A Unidirectional E Fiberglass Laminate limb core lamination designed to add a color stripe through the limb as viewed from the edge of the bow. Available in Black, White, Red and Brown. Sanded 2 Sides.

Uni-Weft Glass - manufactured by Gordon Composites, Inc.

A Continuous Fiberglass/Epoxy Laminate Unidirectional limb core lamination designed to provide increased limb stability where thin or narrow limb design is used, with the addition of a color stripe through the limb when red or black is used, as viewed from the edge of the bow. Available in Natural, Red and Black. Sanded 2 Sides.

Carbon Unidirectional Glass - manufactured by Gordon Composites, Inc.

A Unidirectional Carbon Laminate limb core lamination that provides the ultimate in light weight strength, stiffness and increased performance by providing the highest response, rate of return, weight reduction and fatigue life available. Recommended for laminated limbs with Bo-Tuff E Glass being used as skin glass. Results from the use of this glass may vary depending on the limb weight and design. Ava ilable in Natural (blackish-gray). Sanded 2 Sides.

Power-Tuff Glass - manufactured by Gordon Composites, Inc.

A solid glass material used for cross bow and compound bow limbs where machining is required to shape the limb. Non-traditional users. This glass is available upon special request. Available in Black in widths of 1 1/2, 1 3/4 & 2" and thicknesses to .495". Sanded 1 or 2 sides.

M.S.D.S. and manufacture spec. sheets available upon request.